i-350 L5-3.5L (2006)
NOTE: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use
paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint
clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid
damage to parts and systems.
3. Loose install the vertical bolts retaining the transmission support to the frame.
Tighten
-
Tighten the horizontal nuts to 50 N.m (37 lb ft).
-
Tighten the vertical bolts to 100 N.m (74 lb ft).
4. Lower the transmission.
5. Install the nuts to the transmission mount.
6. Remove the stand or jack.
Crossmember Replacement - Transmission 4WD
Crossmember Replacement - Transmission (4WD)
Removal Procedure
