i-350 L5-3.5L (2006)
13. Install the 1-2 accumulator inner and outer springs to the 1-2 accumulator cover.
14. Install the 1-2 accumulator piston onto the pin in the 1-2 accumulator cover. Ensure that the piston legs face the accumulator cover.
15. Install the 1-2 accumulator cover and the accumulator cover retaining bolts.
^
Tighten the accumulator cover retaining bolts to 11 Nm (97 inch lbs.).
^
RWD (1)
^
4WD (2)
16. Remove the J 25025-B from the transmission case.
17. Install the control valve body.
18. Install the transmission filter and oil pan.
