i-350 L5-3.5L (2006)
7. Position the transmission range selector cable bracket to the transmission.
8. Install the transmission range selector cable bracket bolts.
^
Tighten the transmission range selector cable bracket bolts to 25 Nm (18 ft. lbs.).
9. Adjust the automatic transmission range selector cable. Refer to Automatic Transmission Range Selector Cable Adjustment.
10. Lower the vehicle.
11. Fill the transmission to the proper level with DEXRON III transmission fluid. Refer to Transmission Fluid Checking Procedure and Fluid Capacity
Specifications.
12. Check the COLD fluid level reading for initial fill only.
13. Inspect the oil pan gasket for leaks.
