i-350 L5-3.5L (2006)
Fluid Line/Hose: Service and Repair
Vent Hose Replacement
Vent Hose Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Important: Make a note of the routing in order to aid during reassembly.
Disconnect the transmission vent hose retainer (1, 6) from the following:
^
The heater pipe bracket (2)
^
The transmission range selector cable bracket (5)
3. Disconnect the transmission vent hose (3) from the transmission vent tube (4).
4. Remove the transmission vent hose (3).
Installation Procedure