i-350 L5-3.5L (2006)
Seals and Gaskets: Service and Repair
Front Drive Axle
Differential Carrier Assembly Cover and/or Gasket Replacement
Differential Carrier Assembly Cover and/or Gasket Replacement
Removal Procedure
1. Raise, and support the vehicle.
2. Remove the Engine Protection Shield (EPS), if equipped.
3. Drain the front differential assembly.
4. Remove the differential cover bolts.
Important: The front differential housing cover gasket is reusable. DO NOT replace unless gasket is damaged.
5. Remove the differential cover and gasket.
Installation Procedure