i-350 L5-3.5L (2006)
Seals and Gaskets: Service and Repair
Transmission Housing Oil Seal Replacement - Rear 4WD
Transmission Housing Oil Seal Replacement - Rear (4WD)
^
Tools Required
-
J 6125-1B Slide Hammer
-
J 23129 Universal Seal Remover
-
J 45867 4WD Output Shaft Seal Installer
Removal Procedure
1. Remove the transfer case assembly. Refer to Transfer Case Assembly Replacement.
2. Using the J 6125-1B (1) and J 23129 (2) remove the rear transmission housing oil seal from the housing.
Installation Procedure