isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Relays and Modules - Transmission and Drivetrain > < Transmission Mount Replacement (RPO Z85 and ZQ8)|Page 4230
Page 3
background image

Install the mount to transmission bolts.
^

Tighten the bolts to 60 Nm (44 ft. lbs.).

4. Lower the transmission and install the two nuts securing the transmission mount to the transmission support.

^

Tighten the nuts to 57 Nm (42 ft. lbs.).

5. Remove the transmission jack.
6. Lower the vehicle.

Relays and Modules - Transmission and Drivetrain > < Transmission Mount Replacement (RPO Z85 and ZQ8)|Page 4230