i-350 L5-3.5L (2006)
2. Install the yoke flange to the front output shaft.
3. Lightly lubricate the NEW yoke flange O-ring seal with transfer case fluid.
4. Install the yoke flange O-ring seal.
5. Install a NEW yoke flange nut.
6. Notice: Refer to Fastener Notice in Service Precautions.
Attach the J 8614-01 to the yoke flange.
^
Tighten the yoke flange nut to 137 Nm (101 ft. lbs.).
7. Using a suitable punch, stake the yoke flange nut in 2 places.
8. Install the front propeller shaft.