i-350 L5-3.5L (2006)
Windshield Washer Spray Nozzle: Service and Repair
WASHER NOZZLE REPLACEMENT
REMOVAL PROCEDURE
1. Raise and support the hood.
2. Remove both wiper arms.
3. Remove the fixed antenna mast.
4. Remove the retainers (1, 3, 5) securing the air inlet panel grille (2) to the cowl panel.
5. Remove the air inlet panel from around the hood hinges.
6. Roll the air inlet panel (4) forward.
7. Disconnect the hose from the washer nozzles (2, 3).
8. Press the tabs on the washer nozzles and remove the nozzles from the air inlet panel.
9. Remove the washer nozzle from the air inlet panel.
INSTALLATION PROCEDURE