i-350 L5-3.5L (2006)
Wiper Gear Box: Service and Repair
WIPER TRANSMISSION REPLACEMENT
TOOLS REQUIRED
-
J 39232 Wiper Linkage Separator
-
J 39529 Wiper Linkage Installer
REMOVAL PROCEDURE
1. Place the wiper arms in the 1/2 wipe position.
2. Turn the ignition key to the OFF position.
3. Remove the wiper arms.
4. Remove the air inlet grille panel.
5. Disconnect the electrical connector (3) for the wiper motor.
6. Push the electrical harness grommet (1) through the plenum panel into the cowl.
