i-370 2WD L5-3.7L (2008)
2. Install the intake CMP sensor into the cylinder head.
3. Add sealer GM P/N 12346004 (Canadian P/N 10953480) to the CMP sensor bolt threads.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the intake CMP sensor bolt.
Tighten the CMP sensor bolt to 10 N.m (89 lb in).
5. Connect the engine wiring harness electrical connector to the intake CMP sensor.
