i-370 4WD L5-3.7L (2007)
9. Remove the left door trim panel.
10. Remove the connector position assurance (CPA) (3) from the side impact sensor yellow 2-way connector (5) located near the middle of the door.
11. Disconnect the side impact sensor yellow 2-way connector (5) located near the middle of the door.
12. Remove the trim panel.
13. Remove the connector positive assurance (CPA) from the seat belt pretensioner-left connector.
14. Disconnect the seat belt pretensioner-left connector from the vehicle harness connector. 15. Remove the garnish molding.