I-Mark L4-1.8L 4FBI DSL (1982)
Coolant Temperature Sensor/Switch (For Computer): Customer Interest
Engine - Hard Restart
BT82-009
JULY 12, 1982
ENGINE
DIESEL HARD HOT START
VEHICLES AFFECTED
1981 and 1982 Diesel Vehicles.
SERVICE INFORMATION
After reaching normal operating temperatures, the affected vehicles may be hard to restart after parking for a short period of time. A new thermoswitch
is available that will help this condition. Use the following procedure to install the new thermoswitch.
SERVICE PROCEDURE
1.
After the engine has reached room temperature, slowly remove the radiator cap to release any cooling system pressure. Reinstall radiator cap.
2.
Disconnect and remove the single-wire thermoswitch located on the thermostat housing.
3.
Coat the threads of the new thermoswitch with a non-hardening type gasket sealer. Install the new thermoswitch and reconnect the thermoswitch
lead wire.
4.
Replace any lost coolant.
PARTS INFORMATION
The following part is required for each vehicle serviced:
ITEM
PART NUMBER
DEALER COST
Thermoswitch
8-94252-051-0
$14.28
WARRANTY INFORMATION
Operation Number:
BT82-009
Time Allowance:
0.2
Trouble Code:
32
Parts Allowance:
Dealer cost + 25%
