I-Mark L4-1.8L 4FBI DSL (1982)
20.
Remove cam cover.
21.
Inspect the rocker arm shaft bracket bolts for looseness, retorque as necessary.
22.
Bring No. 1 cylinder to TDC on compression stroke.
23.
Adjust valve clearances of cylinder No. 1, intake valve of No. 2 and exhaust valve of No. 3. Turn crankshaft one full revolution to bring cylinder
No. 4 TDC on compression stroke. Adjust clearances of cylinder No. 4, exhaust valve of No. 2 and intake valve of No. 3.
24.
Reinstall cam cover.
25.
Reverse steps 1 through 19 to reassemble.
