I-Mark L4-1.8L 4FBI DSL (1982)
FIGURE 15-24(b) - Heater Circuit (Diesel Model)
FIGURE 15-24 (b) should also be changed:
FIGURE 15-25 (a) on Page 15-13 , FIGURE 15-25 (b) on Page 15-14 and the wiring diagram at the back of the workshop manual should also be
changed to show the additional fuse.
1981, 1982 and 1983 I-MARK WORKSHOP MANUALS PAGE 18C-27
Step 9A should be added as follows:
9A. Rotate engine clockwise twice to allow tensioner to take up belt slack.
Step 10 should be changed as follows:
10.
Loosen tensioner pulleys and plate bolts. Tighten the bolts in numerical sequence 1, 2, and 3.
