I-Mark L4-1.8L 4FBI DSL (1982)
Power and Ground Distribution: Technical Service Bulletins
Injection Pump Timing - Corrections
BI83-104
February 25, 1983
Miscellaneous
CORRECTIONS TO I-MARK WORKSHOP MANUALS
SERVICE INFORMATION
The following corrections apply to the I-Mark Workshop Manuals listed.
1982 AND 1983 I-MARK WORKSHOP MANUALS PAGE 1-9
Injection pump timing for the 4FB1 engine is incorrect as listed on page 1-9. The correct specification is:
Fuel Injection Timing BTDC (static) 12~
All other injection pump timing specifications shown in the workshop manual are correctly listed as 12~. Also, the underhood label on all vehicles lists
the correct timing specification.
1983 I-MARK WORKSHOP MANUALS PAGE 15-12 through 15-14
An in-line fuse has been installed between the heater blower motor and blower motor resistors on all models. Figure 15-24(a) should be changed to show
the inline fuse: