isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Procedures|Page 63 > < Fuel Filter|Description and Operation
Page 1
background image

Fuel Filter: Procedures

DRAINING THE PRE-FUEL FILTER

1. Loosen the air intake plug (15) and drain plug (2) by turning them counterclockwise (figures 6 and 8).
2. Drain approximately 0.1 liters (3.4 oz) of water.
3. Securely tighten the drain plug and air intake plug.
4, Operate the primer pump on the fuel pump to bleed the fuel system. 
5. Start the engine and check to be sure no fuel is leaking from the drain plug.

Procedures|Page 63 > < Fuel Filter|Description and Operation