NPR L4-5.2L DSL Turbo (2005)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor Replacement
Removal Procedure
1. Turn off the ignition.
2. Loosen the CMP sensor retaining bolt.
3. Remove the CMP sensor.
Installation Procedure
1. Install the CMP sensor.
-
Apply engine oil over the O-ring nice and thin and install it.
2. Tighten the CMP sensor retaining bolt.
Tightening torque: 8 N.m (6 lb ft)
