Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
Brake Caliper: Service and Repair
Rear Caliper
Disassembly
WARNING:
-
Never use an air hose or dry brush to clean brake assemblies.
-
Use an OSHA-approved vacuum cleaner to avoid breathing brake dust.
CAUTION:
-
Do not spill brake fluid on the vehicle. It may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
-
To prevent spills, cover the hose joints with rags or shop towels.
-
Clean all parts in brake fluid and air dry; blow out all passages with compressed air.
Removing Caliper And Banjo Bolts
1. Remove the banjo bolt, and disconnect the brake hose from the caliper.
2. Remove the caliper bolts, then remove the caliper from the bracket.
Removing Pins And Pin Boots
3. Remove the pins and pin boots from the caliper bracket.