Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Wire Harness Replacement
1. Remove the modulator unit from the vehicle.
Removing Wire Harness From Modulator Unit
2. Remove the modulator unit cover, and remove the wire harness.
Location Of The Numbers Stamped Into Set Plate
3. Check the numbers stamped on the set plate, and connect each connector of the new wire harness to the set plate of the corresponding number.
NOTE: Be sure that each connector is locked securely with the two locking tabs.
4. Install the modulator unit cover and modulator unit.
5. Check the ABS function using the ALB checker located under functional checks, anti-lock brake system.
