isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Main Switch Test/Replacement|Page 6208 > < Main Switch Test/Replacement|Page 6206
Page 2
background image

Cruise Control-Set/Resume Switch Test/Replacement-Front Passenger's Side

5.  Disconnect the cable reel 6P connector from the SRS main harness, then connect test harness C only to the cable reel side of the 6P connector.

Cruise Control-Set/Resume Switch Test/Replacement-Front Passenger's Side

6.  Check for continuity between the terminals of test harness C in each switch position according to the table.

^  If there is continuity, and it matches the table, the switch is OK.
^  If there is no continuity in one or both positions, go to step 7.

Cruise Control-Set/Resume Switch Test/Replacement-Front Passenger's Side

7.  Carefully remove the set/resume switch cover by prying between the cover and the switch in the sequence shown.

Main Switch Test/Replacement|Page 6208 > < Main Switch Test/Replacement|Page 6206