isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Balance Shaft Bearing > < Balance Shaft|Removal|Page 1458
Page 6
background image

19. Install the oil pan gasket and oil pan.

NOTE:

-

Use a new oil pan gasket.

-

Install the oil pan no more than five minutes after applying liquid gasket.

20. Tighten the nuts finger-tight at six points as shown below.
21. Tighten all bolts and nuts, starting from nut (1), clockwise in three steps to achieve a final torque of 14 Nm (10 ft. lbs.)

NOTE:  Excessive tightening can cause distortion of the oil pan gasket, and oil leakage.

Balance Shaft Bearing > < Balance Shaft|Removal|Page 1458