isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Blower Motor|Page 5206 > < Initial Inspection and Diagnostic Overview|Page 5203
Page 1
background image

Blower Motor: Service and Repair
Blower Motor

1.  Remove the right and left lids, rear A/C unit switch, intake grille, outlet panel and the lower case.

Blower Motor Replacement

2.  Disconnect the connector, then remove the four self- tapping screws and the blower motor assembly.

Blower Motor Replacement

3.  Remove the two self-tapping screws and the bracket, then remove the four self-tapping screws and the housing.

Remove the set screw and the blower motor.

4.  Install in the reverse order of removal, and make sure there are no air leaks.

Blower Motor|Page 5206 > < Initial Inspection and Diagnostic Overview|Page 5203