Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
Control Assembly: Adjustments
TEMPERATURE CONTROL CABLE
Temperature Control Adjustment
1. Under the hood, disconnect the heater valve cable from the heater valve.
Temperature Control Adjustment
2. Under the dash, remove the clip and the heater duct from the heater unit.
Temperature Control Adjustment
3. Disconnect the air mix cable housing from the cable clamp.
4. Set the temperature control lever to MAX COOL.
5. With the air mix control cable attached to the air mix control arm, gently pull on the outer cable housing to fully close the door and to remove any
slack in the cable, then snap the air mix control cable housing into the cable clamp.
6. Reinstall the heater duct and the clip on the heater unit.
