Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
Circuit Identification For In-line And Fuse Box Connectors
Use this chart to help diagnose multiple symptoms in separate circuits which could be caused by a single problem in a connector shared by those circuits.
Here's how that chart could help you find such a problem:
1. Pick one of the multiple symptoms and look up the schematic for that circuit.
2. Make a list of all in-line and fuse box connectors in that schematic.
3. Then, in the chart, look up each connector on your list to see if circuits related to the other symptoms run through one of them. If they do, inspect
that connector for the problem.
Example: The horn, A/C, and the right headlight don't work. List all in-line and fuse box connectors in the horn circuit and then check the chart. You
find that C211 is common to the A/C circuit and the headlight circuit, so you inspect C211 and find the problem: bent terminals.
Component Locations
Component Locations
To see where a component or connector is located on the car, look up its photo number in the Component Location section. The photo will also tell you
the color of the connector, and how many cavities it has.
