isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Horn Switch|Testing and Inspection|Page 6999 > < Horn Switch|Testing and Inspection
Page 2
background image

Horns-Switch Test-Front Passenger's Side

5.  Disconnect the cable reel 6P connector from the SRS main harness, then connect test harness C only to the cable reel side of the 6P connector.

Horns-Switch Test-Front Passenger's Side

6.  Check for continuity between the No. 3 terminal of the 8P connector of test harness C and body ground with the horn switch pressed.

^  If there is continuity, the horn switch is OK.
^  If there is no continuity, go to step 7.

Horns-Switch Test-Front Passenger's Side

7.  Carefully remove the cruise control set/resume switch cover by prying between the cover and the switch in the sequence shown.

Horn Switch|Testing and Inspection|Page 6999 > < Horn Switch|Testing and Inspection