isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Balance Shaft Belt|Removal|Page 1114 > < Balance Shaft Belt|Removal
Page 2
background image

6. Remove the alternator terminal and connector.
7. Remove the side-engine mount.

NOTE:

-

Use a jack to support the engine before the side engine mount is removed.

-

Make sure to place a cushion between the oil pan and the jack.

8. Remove the dipstick and the pipe.
9. Remove the cylinder head cover.

10. Remove the pulley bolt and crankshaft pulley.

11. Remove the rubber seal from the adjusting nut, then remove the upper and lower covers.

Balance Shaft Belt|Removal|Page 1114 > < Balance Shaft Belt|Removal