isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Malfunction Indicator Lamp - A/T > < MIL Never Comes on|Page 1360
Page 3
background image

NOTE:

-

When there is no Diagnostic Trouble Code (DTC) stored, the MIL will stay on if the SCS service connector is connected and the ignition switch is
ON.

-

If this symptom is intermittent, check for:
-

A loose ECU (PCM) (15 A) fuse in the under-hood fuse/relay box

-

A loose No. 2 FUEL PUMP fuse (15 A) in the under-dash fuse/relay box

-

An intermittent short in the wire between the PCM (C7) and the service check connector

-

An intermittent short in the wire between the PCM (A/B) and the gauge assembly

-

An intermittent short in the wire between the PCM (D4) and the MAP sensor

-

An intermittent short in the wire between the PCM (D10) and the TP sensor, EGR valve lift sensor.

-

PGM-FI main relay

-

See the OBD II scan tool or Honda PGM Tester user's manuals for specific operating instructions.

Malfunction Indicator Lamp - A/T > < MIL Never Comes on|Page 1360