Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
Timing Belt: Service and Repair
Installation
NOTE: Install the timing belt and timing balancer belt in the reverse order of removal.
-
Only key points are described here.
-
Clean the upper and lower covers before installation.
1. Remove the timing balancer belt drive pulley.
2. Set the timing belt drive pulley so that the No. 1 piston is at top dead center (TDC). Align the dimple on the tooth of the timing belt drive pulley
with the V pointer on the oil pump.
3. Set the camshaft pulley so that the No. 1 piston is at TDC. Align the TDC marks on the camshaft pulley with the cylinder head upper surface.