Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
Under-dash Fuse/Relay Box Removal/Installation
8. Disconnect the connectors from the under-dash fusel relay box, and take out the under-dash fuse/relay box.
CAUTION: Avoid breaking the SRS main harness connector; it's double-locked.
First lift the connector lid with a thin screwdriver, then press the connector tab down, and pull the connector out.
Installation:
1. Connect the connectors to the under-dash fuse/relay box, then install the fuse/relay box in the reverse order of removal.
NOTE: To install the SRS main harness connector, push it into position until it clicks, then close the connector lid.
2. Disconnect the short connector (RED) from the driver's airbag 3P connector, then connect the airbag connectors to the SRS main harness.
3. Attach the driver's airbag short connector (RED) to the access panel, and install the access panel to the steering wheel.
4. Connect the battery positive cable and negative cable to the battery.
5. Enter the anti-theft code for the radio, then enter the customer's radio station presets.
