Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
Replacement Airbag Assembly
Driver's Side:
^
Remove the two Torx bolts using a Torx T3O bit, then remove the driver's airbag assembly.
Front Passenger's Airbag Mounting Nuts
Front Passenger's Side:
^
Remove the four mounting nuts, then lift the front passenger's airbag out of the dashboard.
NOTE:
-The lid of the airbag assembly has pawls on its side which attach it to the dashboard. To remove the airbag assembly, cover the lid and dashboard
with a cloth, and pry carefully with a flat tip screwdriver.
-Do not confuse the lower mounting nuts with the upper mounting nuts. The upper mounting nuts are not self-locking.
CAUTION: Be sure to install the SRS wiring so that it is not pinched or interfering with other vehicle parts.
5. Install the new airbags:
