Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
Heater Upper / Lower Covers
5. Disconnect the SRS main harness 18P connector from the SRS unit.
Driver's Side
Front Passenger's Side
6. Remove the four Torx bolts from the SRS unit, then pull out the SRS unit from the driver's side.
CAUTION:
^
Be sure to install the SRS wiring so that it is not pinched or interfering with other parts.
^
When tightening the Torx bolts to the specified torque after replacement, be careful to turn them in so that their heads rest squarely on the
brackets.
