Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
SRS Unit Replacement
7. Stick the SRS unit cover onto the upper surface of the new SRS unit, and install the new SRS unit.
SRS Unit Replacement
8. Connect the SRS main harness 18P connector to the SRS unit, then push it into position until it clicks.
9. Install the heater lower covers on the center con- sole.
10. Remove and properly store the short connector, then reconnect the airbag connectors (and reinstall the access panel and the dashboard
compartment).
11. Reconnect the battery positive cable, then the negative cable.
12. After installing the SRS unit, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator light should come on for about
six seconds and then go off.
13. Enter the anti-theft code for the radio, then enter the customer's radio station presets.
