isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Photo 44|Page 954 > < Photo 44|Page 952
Page 1
background image

Transmission Mode Switch: Service and Repair

WARNING:  Make sure lifts, jacks and safety stands are placed properly.   

1. Raise the front of the vehicle, and support it with safety stands.  
2. Set the parking brake, and block both rear wheels securely.
3. Shift to [N] position.

4. Remove the A/T gear position switch connector from the connector bracket, then disconnect the A/T gear position switch connector.
5. Place a jack under the transmission, and raise the transmission just enough to take weight off the mount.

6. Remove the transmission mount.
7. Remove the jack from the transmission, and lower it.

Photo 44|Page 954 > < Photo 44|Page 952