Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
12. Set the pump cam ring over the two rollers with the "oo" mark on the cam ring upward.
13. Apply clean power steering fluid to the vanes and cam ring.
14. Install the 68.5 x 1.9 mm O-ring on the pump cover.
15. Align the roller set holes in the pump cover with the rollers.
16. Align the projection on the pump housing and the projection on the pump cover, and tighten the four bolts.
17. Set the 13 x 1.9 mm O-ring on the inlet joint.
18. Install the inlet joint on the pump housing.
