Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
joint pin might be damaged by the special tool.
NOTE: Remove the ball joint using the special tool.
9. Separate the tie-rod ball joint and knuckle using the special tool.
CAUTION: Avoid damaging the ball joint boot.
10. Remove the left tie-rod end, then slide the rack all the way to the right.
11. Separate the TWO and joint pipe by removing the self-locking nuts.
NOTE: Always replace the gaskets with new ones.
12. Remove the return line from the top of the rear beam.