Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
6. Disconnect the short connector from the airbag connector.
7. Connect the airbag 3P connector and cable reel 3P connector.
8. Attach the short connector on the access panel, then install the access panel on the steering lower cover.
9. Connect the positive cable first, then the negative cable to the battery.
10. After installing the driver's airbag assembly, confirm proper system operation:
a. Turn the ignition switch ON (II); the SRS indicator light should come on for about 6 seconds and then go off.
b. Confirm operation of horn buttons.
c. Confirm operation of cruise control set/resume switches.
d. Turn the steering wheel counterclockwise and make sure the yellow gear tooth still lines up with the alignment mark.
