Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
2. Select the 2.60 mm (0.102 inch) thrust shim from the middle of the table.
3. After installing the thrust shim, install the outer race in the transmission housing, using the special tools as shown.
NOTE:
-
Install the outer race squarely in the transmission housing.
-
Check that there is no clearance between the outer race, shim and transmission housing.
-
With the mainshaft, countershaft and secondary shaft removed, install the differential assembly, and torque the transmission housing.
NOTE: Install the gasket when checking starting torque.
5. Rotate the differential assembly in both directions to seat the bearings.
