isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Lever Replacement|Page 3769 > < Shifter A/T|Specifications|Page 3766
Page 1
background image

Shifter A/T: Service and Repair
Lever Replacement

1. Remove the steering lower cover, and upper and lower column covers.

2. Shift to N position, then remove the lock pin from the cable adjuster.

3. Remove the flange nuts securing the steering column, then lower the steering column.

CAUTION:  Take care not to bend the shift cable when lowering the steering column.

4. Disconnect the shift lock solenoid connector and the parking pin switch connector.
5. Remove the bolts securing the shift lever assembly, then remove the shift lever assembly.
6. Install the shift lever assembly in the reverse order of removal.

NOTE: 
-

Make sure the lock pin is seated securely in the cable adjuster.

Lever Replacement|Page 3769 > < Shifter A/T|Specifications|Page 3766