Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
CAUTION: Residual moisture in the cooler or pipes can damage the transmission.
15. Remove the flusher from the cooler line. Attach the drain hose to a container.
16. Install the transmission, and leave the drain hose attached to the cooler line.
17. Make sure the transmission is in P position. Then fill the transmission with ATF, and run the engine for 30 seconds or until approximately 0.95 l
(1.0 US qt.) is discharged.
18. Remove the drain hose, and reconnect the cooler return hose to the transmission.
19. Refill the transmission with ATF to the proper level.
