Oasis LS L4-2156cc 2.2L SOHC MFI F22B6 (1997)
2. Seat the internal circlip in the groove of the bearing support.
3. Press the intermediate shaft into the shaft bearing using the special tool and a press.
4. Seat the external circlip in the groove of the intermediate shaft.
5. Press the outer seal into the bearing support using the special tools and a press.
CAUTION: Do not damage the lip on outer seal during installation.
NOTE: Press the seal flush with the bearing support.
6. Install the new set ring in the intermediate shaft groove.
