Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
Caliper Pins And Boots
6. Apply the recommended seal grease in the caliper seal set to the sliding surface of the pins and the inside of the new pin boots.
7. Install the pin boots into, the grooves in the caliper bracket properly.
8. Install the pins into the caliper bracket.
9. Install the pin boots into the grooves in the pins properly.
10. Install the brake pads in their original positions.
11. Push in the piston so that the caliper will fit over the pads, and install the caliper.
12. Tighten the caliper bolts.
13. Connect the brake hose to the caliper with new sealing washers, and tighten the banjo bolt.
14. Fill the brake reservoir and bleed the brake system.
15. After installation, check for leaks at hose and line joints or connections, and retighten if necessary.
