Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
Piston Boot & Seal Replacement
2. Coat a new piston seal with the recommended rubber grease in the caliper seal set, and install the seal in the cylinder groove.
3. Apply the recommended seal grease in the caliper seal set to the sealing lips and inside of a new piston boot, and install it in the caliper.
CAUTION: Be careful not to damage the caliper cylinder wall.
Installing Piston In Cylinder
4. Lubricate the caliper cylinder and piston with brake fluid, then install the piston in the cylinder with the dished end facing in.
Installing Pad Spring
5. Install the pad spring on the caliper body.