isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Brake Hose/Line|Specifications|Page 2943 > < Brake Hose/Line|Specifications|Page 2941
Page 1
background image

Brake Hose/Line: Service and Repair

CAUTION: 

^

Before reassembling, check that all parts are free of dust and other foreign particles.

^

Replace parts with new ones whenever specified to do so. 

^

Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.

1. Replace the brake hose if the hose is twisted, cracked, or if it leaks.

Disconnecting Brake Hose

2. Disconnect the brake hose from the brake line using a 10 mm flare nut wrench.

Removing Brake Hose Clip

3. Remove and discard the brake hose clip from the brake hose.
4. Remove the banjo bolt, and disconnect the brake hose from the caliper.

Brake Hose/Line|Specifications|Page 2943 > < Brake Hose/Line|Specifications|Page 2941