Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
Measuring Dimension L
3. While pulling the lever toward the spring, measure between the outer surface of the pin and the outer surface of the 8 mm adjusting bolt. Use the
nut-side of the adjusting bolt, and keep the calipers parallel to the spring.
4. If the measurement is outside the specification, loosen the 8 mm flange nut, and adjust the spring's dimension L according to the table below.
NOTE: If the fuel level of the vehicle is not at FULL, compensate dimension L according to the fuel level.
Example:
Type: LX, 7-passenger
Fuel level: 1/2
