Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
7. Pull the brake booster forward, then turn it to the right until the operating rod is clear of the bulkhead.
8. Remove the brake booster from the engine compartment.
9. Install the brake booster in the reverse order of removal.
NOTE: Using the special service tool (07JAG-SD40100) adjust the pushrod length before installing the brake booster.
10. Install the master cylinder.
11. After installation, perform the following inspections and adjust if necessary.
-
Brake pedal height
-
Brake pedal free play
