isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Condenser HVAC|Service and Repair|Page 3574 > < Component Inspection|Page 3570
Page 1
background image

Condenser HVAC: Service and Repair

1. Recover the refrigerant with a Recovery/Recycling/Charging System.

Condenser Replacement

2. Remove the coolant reservoir. Remove the two bolts and the suction hose bracket.

NOTE:  Do not disconnect the reservoir hose from the coolant reservoir and the radiator.

Condenser Replacement

3. Remove the four bolts and the two radiator upper mount brackets.

4. Remove the bolts, and disconnect the discharge line and the condenser line from the condenser.

NOTE:  Plug or cap the lines immediately after disconnecting them to avoid moisture and dust contamination.

Condenser HVAC|Service and Repair|Page 3574 > < Component Inspection|Page 3570