isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Sensors and Switches - Brakes and Traction Control > < Sunroof / Moonroof Switch|Testing and Inspection|Page 221
Page 2
background image

Sunroof (USA)-Switch Test/Replacement

3. Check for continuity between the terminals in each switch position according to the table.

NOTE:  The switch contains three diodes. Use an analog ohmmeter or a digital ohmmeter equipped with a diode tester.

If there is no continuity, replace the switch.

Sensors and Switches - Brakes and Traction Control > < Sunroof / Moonroof Switch|Testing and Inspection|Page 221