Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
3. Install the new ball bearing using a press as shown.
REASSEMBLY
1. Align the pin of the sub-valve with the oil passage in pump housing, and push down the sub-valve. Fix the sub-valve with the snap ring.
2. Install the new pump seal in the pump housing by hand, then install the pump seal spacer.
NOTE: Insert the pump seal with its grooved side facing in.
3. Position the pump drive shaft in the pump housing, then drive the it in using a 29 mm socket as shown.
