Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
9. Set the 10 vanes in the grooves in the rotor.
NOTE: Be sure that the round ends of the vanes are in contact with the sliding surface of the cam ring.
10. Coat the O-ring with power steering fluid, and install it into the grooves in the side plate.
11. Install the side plate on the cam ring by aligning the roller set holes in the side plate with the rollers.
12. Coat the O-ring with power steering fluid, and position it into the pump housing.
13. Install the pump cover assembly in the pump housing.
